STONEX S980A - Settings Menu

Stonex S980A GNSS Receiver – User Manual v1.0
33
7.4.2 Base external
The user has also the possibility to start a base with an external device.
To do that, in radio mode menu, it is necessary to choose Ext
Inside Ext menu the user can set the communication Baud Rate of the external
device via 5-Pin LEMO cable.
7.5 Settings
Inside menu Settings, the user can change the light time of the screen, start a
self-check, start a Restore Factory Settings or change the Display touch
language.
After every change, to confirm it, it is necessary to press OK.