STONEX S980A - Display Touch Menu; Status of the Receiver

Stonex S980A GNSS Receiver – User Manual v1.0
29
7. Display Touch Menu
The Stonex S980A is equipped with a Display touch.
Through the touch screen the user can check the status of the receiver, start a
static session, start a base via UHF and start a base using an external device
(e.g an external radio).
7.1 Status of the receiver
As default on the display, it appears the status of the receiver.
There, it is shown the HRMS, VRMS, PDOP of the current solution.
It shows the status, and the current working mode.
It is also shown the level of the battery.
*To go back to the previous page in the menu scroll to the right.