Storage Options EYECam - Ip Camera Client Software; Log in to IP Camera Client

12
IP CAMERA CLIENT SOFTWARE
The IP Camera Client software can be used to manage up to 64 IP Cameras attached to the local network. Refer to
section “6.2 – Install IP Camera Client” (page 9) for instructions on how to install this software.
8.1 – LOG IN TO IP CAMERA CLIENT
Follow this procedure to configure the software:
1. Launch IP Camera Client by double-clicking the icon on the Windows desktop:
2. You will be presented with a login screen.
TIP
This account is used only for access to IP Camera Client and is not the same as the one on the IP Camera!
NOTE
The default user name is “admin” and password is “admin”.
When closing the IP Camera Client software, you will need to supply these details again. This is a security feature,
and as such it cannot be switched off.