ISP Immersive Sound Processor
11
Installer: installer
Expert User: expert
If you are a dealer or custom installer, you
are advised to change these passwords and
document them. Similarly, if you are a client
and wish to lock other users out of settings,
you may wish to change default passwords
as well.
If you have forgotten your passwords and
have locked yourself out of the ISP, you can
reset them back to default by following the
procedure “Default Passwords” on page 8.
6. Access Management
This area permits a user logged in as installer
to assign access to specific setup functions
to the Expert User. For example, if the ISP
is installed at property with technical staff,
the installer may wish to permit the Expert
User to make changes to the inputs for the
purposes of installing a new source, but
restrict their ability to make changes to
speaker EQ, apply firmware updates, etc. Any
setup menu marked Y in grayed is accessible
to a user with the Expert User password.
Note that after making any changes, you must press the
SAVE button near the top right of the screen or you will loose
your changes.
To Next Page
Loading...
