SN6000
On this product, data is stored on 2 SSDs accessible from the rear panel.
Each SSD can be easily extracted: to unlock its tray, press on the lever while pushing it laterally
towards the right.
Other data is stored on an internal SSD.
Dismantling
1. Unscrew the 4 fastening screws from the cover of the chassis with a Philips screwdriver:
l
2 lateral countersunk screws on the rear of the product.
l
2 pan head machine screws on the rear panel.
2. Open up the appliance by pushing the cover towards the back.
This operation will tear the warranty sticker:
3. Locate the SSD:
SNS - TECHNICAL NOTE
SECURE RETURN OPTION
Page 17/29 sns-en-secure_return_option_technical_note - 08/01/2022
To Next Page
Loading...
