Step 3: Fit edging strip & secure
appliance into housing unit
Before inserting the appliance into the
cabinet, fit the silicon edging strip
(supplied in the oven pack) to the front
side edges of the front frame. Trim to
size.
Fitting the edging strip:
Detail:
Insert appliance into cabinet. Note:
The unit housing the appliance must be
appropriately fixed.
To secure the appliance to the housing
unit, open the grill / top oven door and
screw 2 screws through the top corner
holes in the front frame, ensuring that the
appliance is centrally located. Take care
not to damage the appliance or cabinet.
22
To Next Page
Loading...