EasyManua.ls Logo

STOVES Q900EM - Introduction - Operational & Safety Tips; Cooling Fan Operation; Changing a Light Bulb; Electrical Connection and Safety

STOVES Q900EM
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cooling fan
When the appliance is switched on,
you will hear the cooling fan come on,
this keeps the exterior of the appliance
cool during cooking, and will continue
to operate to cool the appliance for
about 10 minutes after the last control
has been switched off.
To change a light bulb
Switch off the electricity supply to the
appliance at the socket, to avoid the
risk electric shock.
Wait until the oven is cool, then
remove the oven shelves.
The lens cover on the light can be
removed by pulling away from the
oven side. Unscrew the bulb.
Please note that oven light bulbs are
not covered by guarantee.
Electrical connection
Please refer to the ‘Installation
Instructions’.
For your safety, employ a competent
electrician.
Warning: This appliance must be
earthed.
In the event of a power cut
1. Switch off the electricity supply to
the appliance at the fused spur.
2. When the power returns, see the
‘Programmer / Clock’ section to
‘Set the time of day’.
3
INTRODUCTION
23897 01 - Q900EM 20/09/2002 09:12 Page 5

Related product manuals