EasyManua.ls Logo

Streamax MDVRs User Manual

Default Icon
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ISTALLATON M-ALL MDVR-2012_Q2_Ver 1.0
1/27
Installation Manual
For
All Streamax MDVRs
Mobile Digital Video Recorder
Copyright 2012-2014, Streamax Video Technology Co., Ltd
All Rights Reserved
Question and Answer IconNeed help?

Do you have a question about the Streamax MDVRs and is the answer not in the manual?

Streamax MDVRs Specifications

General IconGeneral
Operating SystemLinux
Video CompressionH.264/H.265
GPSYes
Wi-FiOptional
3G/4GOptional
Video Input Channels4/8/16 channels
Audio Input Channels4

Summary

Important Installation Notices

Installation General Instruction

Rough Installation Steps

Lists the sequential steps involved in the installation process.

MDVR Device Installation Part 1

Pre-Installation Preparation

Covers technical requirements, installer qualifications, and planning before installation.

Reference Installation Tools

Lists and describes the essential tools required for the installation process.

MDVR Device Installation Section 2

MDVR Working Environment

Details environmental considerations like anti-vibration, ventilation, and waterproofing for MDVR installation.

MDVR Protection and Installation Guidelines

Covers MDVR protection measures and general installation guidelines.

Hard Disk and Power Connection

Guides the installation of the hard disk and power connection for the MDVR.

MDVR Unit Installation

Details the physical installation of the MDVR unit within the vehicle.

Camera Installation

Covers camera selection, regulations, and installation diagrams.

Antenna (GPS/WIFI/3G) Connection

Explains how to connect and fix GPS, WIFI, and 3G antennas.

Monitor Installation

Provides guidance on where and how to install the monitor for driver visibility.

I/O Sensor Connection

Explains how to connect I/O sensors to the MDVR.

Alarm System Connection

Details the installation of driver and passenger alarm systems.

Cable and Wire Management

Provides methods for connecting cables and wires, including cold pressing and welding.

System Testing After Installation Part 2

MDVR Device Testing

Outlines inspection steps before and after powering the MDVR unit.

Accessories Testing

Describes testing cameras and monitors after installation.

Recording and Network Testing

Covers testing MDVR recording functions and wireless network connectivity.

Sensor and Speed Testing

Details testing I/O sensors and vehicle speed/pulse inputs.

Software Upgrade and Wireless Functionality

Guides checking wireless network status, GPS, and software upgrade procedures.

Related product manuals