Streamax MDVRs - Page 18

ISTM-ALL MDVR-2012_Q2_Ver 1.0
18/27
2) The Photos for Reference
3) Alarm System for Passengers
Signal wire of this alarm button is 4*0.2 wires. The wiring diagram as picture below:
Generally the alarm system for passenger are installed near by the passenger and the wiring should go with
Any
sensor
inputs
(Supposed
sensor
Any
sensor
inputs
(Supposed
sensor
4)
F
o
r
high
level
power
input
Fuse
Fuse
The
connectors
on
the
back
of
the
button
Pin 2: Power Positive polarity………Red
Pin 4: Power negative polarity……..Black
Pin1: Alarm input…………………..Green
Pin3: Alarm output…………………White