Lisa LCD 40
Failure to allocate requested memory for activation functionality
Tried to start a card function but no card license is present
Request to activate while activation is already ongoing
Tried to start a codec function but no codec license is present
Activation instructions are incomplete or incorrect [internal error]
Activation instructions are incorrect
Could not access PHY. Indicates potential hardware issue.
Link not available, make sure the device is physically properly connected to the network
infrastructure
Could not access PHY. Indicates potential hardware issue.
Link not available, make sure the device is physically properly connected to the network
infrastructure
No connection can be made because network interface is not yet configured (e.g. when device is in
configuration wizard)
Playlist entry will be skipped, because this is being downloaded at the specific moment
5.12 Support
For technical support regarding the Lisa devices, software tools or technical documentation, please
contact your dealer first. In case you are a direct customer of Streamit, please visit the support page
(http://www.streamit.eu/support/) where you will find knowledgebase section as well as an option to
submit support tickets.