Streamit Lisa LCD - Page 68

Lisa LCD 68
Message
Description
Extra information/comments
SW update check failed
RSU enabled but device fails to
connect to update server or does
not get correct info file.
SW update failed
Software update is required, but
the Lisa cannot complete the
update
Cannot download the software file
or the downloaded software file is
not correct.
Configuration update failed
Device does not succeed to get
its configurations at startup
Not applicable for fixed operation
mode.
Cannot start content update - card
not mounted
Content update started
Device starts the content update
procedure
Pls.ud finished - <INFO>
Content update finished. See table
below for <INFO>
Cleanup card started
Cleanup card failed
Task was started, but could not
write to the card
Cleanup card finished - <INFO>
<INFO> - summary of the cleanup
card process
tr.proc
number of tracks
processed
tr.del
number of tracks/
files deleted
Erase playlist finished - <nr>
playlists remaining
<nr> represents the number of
playlists remaining on the card
after the task completed
Erase card failed
Could not start the erase card
E.g. no card present
Erase card finished
Done with the erase card
procedure
Card command interrupted
Cc, ec or ep task was interrupted
by another task or user interaction
(power button)
Cannot play from card - card not
mounted