StreetWise NightWatcher - Pre-Installation and Setup; Installation Recommendations and Tools

4
Pre-installation
WARNING: DUE TO THE INHERIT RISKS OF WORKING WITH ELECTRICITY, WE RECOMMEND THAT THE
INSTALLATION OF THIS PRODUCT BE DONE BY A QUALIFIED ELECTRICIAN.
PLANNING INSTALLATION
Never attempt to turn the light head by hand as this can damage the internal motor components and will void the
warranty.
NOTE:
Before attempting any installation or maintenance,
ensure that the electrical supply is switched off and the
circuit fuses removed or the circuit breaker is in the
“OFF” position.
TOOLS REQUIRED (NOT INCLUDED)
Hammer
Safety
goggles
Phillips
screwdriver
Level
HARDWARE INCLUDED
NOTE: not shown in actual size.
Part
Description
Quantity
AA
Mounting screw
2
BB
Drywall screw
2
CC
Plastic masonry plug
2
DD
Wire nut
3
EE
Cross bar
1
FF
Allen Key
1
AA
B
C
D
E
FF