Strobel VEB 200-1 - Default Chapter; Table of Contents

3 BA_VEB200-1-2_A2_180618_en
Operating instructions
STROBEL Classes VEB200-1 and VEB200-2
Contents
1 General notes on safety .............................................................................................. 5
2 General ....................................................................................................................... 7
2.1 Operating instructions ..................................................................................... 7
2.2 Class identification, serial number and orientation of the machine ................. 7
2.3 Range of applications ..................................................................................... 7
2.4 Technical data ................................................................................................ 8
3 Installation and putting into service ............................................................................. 9
3.1 Unpacking the machine .................................................................................. 9
3.2 Installation (Fig. 1 and Fig. 2) ......................................................................... 9
3.3 Sense of rotation .......................................................................................... 10
4 Instructions for use .................................................................................................... 11
4.1 Needles and threads .................................................................................... 11
4.2 Inserting the needle ...................................................................................... 11
4.3 Threading and thread course (Fig. 3) ........................................................... 13
4.4 Thread tension (Fig. 2) ................................................................................. 14
4.5 Thread take-up lever (Fig. 2) ........................................................................ 14
4.6 Stitch depth control ....................................................................................... 14
4.6.1 Setting the stitch depth (Fig. 2) ............................................................... 14
4.7 Cloth retainer ................................................................................................ 15
4.7.1 Presser stopper ....................................................................................... 17
4.7.2 Setting the presser stopper for sewing across cross-seams
(Fig. 4, Fig. 7 and Fig. 8) ................................................................ 17
4.7.3 Setting the automatic plunger ................................................................. 17
4.8 Setting the material guide ............................................................................. 17
4.9 Material feed ................................................................................................. 18
4.9.1 Setting the stitch length (Fig. 2) .............................................................. 18
4.9.2 Setting the feed dog ................................................................................ 18
4.10 Sewing drive ................................................................................................. 18
4.11 Seam lock ..................................................................................................... 19
4.11.1 General information ................................................................................ 19
4.11.2 Switching on the seam lock .................................................................... 19
4.11.3 Seam lock ................................................................................................ 19
4.11.4 Thread tension at seam lock .................................................................. 20
4.11.5 Feed dog at seam lock ............................................................................ 20
4.11.6 Plunger lowering at seam lock ................................................................ 20
4.11.7 Switching off the seam lock .................................................................... 20