7 BA_VTD410EV_A2_180706_en
2 General
2.1 Operating instructions
Any person involved in the installation, operation, maintenance and repair of
the machine must have read and understood the operating instructions and
mainly the safety instructions before starting the machine.
2.2 Class identification, serial number and orientation of the
machine
The operating side of the machine is the starting point for the description
referring to sides. The class identification (type) as well as the machine and
model number (after the dash) are located below the left hand wheel.
2.3 Range of application and intended use
High capacity insoling machine for attaching the insole to uppers made of
Kevlar, leather and textile materials up to a total thickness of 11 mm, with
differential feed for gathering low extra fullness at the ball part and with shaft
coupling for the front cup drive.
To Next Page
Loading...
