Strobel VTD410EV - General Information; Operating Instructions and Machine Details

3 BA_VTD410EV_A2_180706_en
Operating Instructions
STROBEL – Class VTD410EV
Contents
1 General notes on safety ............................................................................................ 5
2 General ..................................................................................................................... 7
2.1 Operating instructions ..................................................................................... 7
2.2 Class identification, serial number and orientation of the machine................. 7
2.3 Range of application and intended use .......................................................... 7
2.4 Technical data ................................................................................................ 8
3 Installation and putting into service ........................................................................... 9
3.1 Unpacking the machine .................................................................................. 9
3.2 Installation (Fig. 1) .......................................................................................... 9
3.3 Sense of rotation .......................................................................................... 11
3.4 Motor drive via toothed belt .......................................................................... 11
3.4.1 Tensioning the toothed belt (Fig. 2) ................................................. 11
3.5 Positions of the machine .............................................................................. 12
3.6 Lubrication .................................................................................................... 16
4 Instructions for use and maintenance, accessories ................................................ 17
4.1 Needles and threads .................................................................................... 17
4.2 Inserting the needle (Fig. 9) .......................................................................... 17
4.3 Threading - thread course (Fig. 9 and Fig. 10) ............................................. 19
4.3.1 Threading ......................................................................................... 19
4.3.2 Thread course (Fig. 11 and Fig. 12) ................................................. 19
4.4 Thread tension.............................................................................................. 21
4.5 Setting the stitch length ................................................................................ 22
4.6 Setting the material guide ............................................................................. 23
4.7 Sewing drive ................................................................................................. 23