Strom SSRTPR05 - Temporary Overrides; Temporary Temperature Boost; Enabling Manual Mode; Disabling Manual Mode

12
DELIVERING THE POWER
STROM LIMITED
TEMPORARY OVERRIDES
USER GUIDE
Temporary Temperature Boost:
You can temporarily override the temperature of the thermostat till the next
programmed event. To do this simply:
1. Ensure the “FUNCTION SLIDER” is set to “AUTO”.
2. You can change the set temperature by using the “ADJUSTMENT
SELECTORS” .
Enabling Manual Mode:
You can take the controller out of its programmed settings and put the
controller into manual mode. This mode disables the timed events and
relies purely on temperature control to call for heat. This function will
stay engaged until manually disabled (this is not recommended for long
durations as it is very inecient)
1. Move the “FUNCTION SLIDER” to “MAN”.
2. You can change the set temperature by using the “ADJUSTMENT
SELECTORS” .
Disabling Manual Mode:
To disable manual mode simply:
1. Move the “FUNCTION SLIDER” to “AUTO”.
9
4
9
4
9