14
DELIVERING THE POWER
STROM LIMITED
USER GUIDE
RESETING THE CONTROLLER
Resetting the controller should be used as a last resort as by doing so
you will return your device back to its factory settings and remove all
programming you may have done.
Prior to carrying out a reset we suggest that you ensure that the
programming information has been completed on page 9 using the review
procedure on page 10.
To reset your control simply:
1. Locate the reset button on the controller as below
2. Using a pin press the reset button until the display goes blank.
3. This has now reset the time on the control unit.
4. Press the Home and “-” button at the same time and press reset
again.
5. The screen will now display CLr and all function of the control will
have returned to default.
RESET
HOLIDAY
To Next Page
Loading...
