Strong SRT 4930 - 6.4 Electronic Program Guide; 1) EPG

35
English
34
6.4 Electronic Program Guide
1) EPG
This submenu allows you to access the electronic program guide when available.
⊹
Press the GUIDE button to display the guide menu. <Figure 6.4.1>
⊺
Press / to see the previous/next guide.
⊻
Press / / / to select another channel. <Figure 6.4.1>
⊼ Press to watch the selected channel and access its EPG data.
If you press in the right side of the screen (Event display list).
- If the current time EPG is selected, you will return to the previous menu and get signal
from the selected channel.
- If a future time (next) EPG is selected, the selected program will be reserved and the
event color will change.
⊽ You can select TV or Radio channels by pressing the TV/RADIO button
⊾ You can choose a channel list group by pressing the GROUP button.
⊿ You can access the timer menu by pressing the RED button. <Figure 6.4.2>
2) Timer
This sub menu allows you to set the on/off time of your receiver.
⊹
This submenu allows you to set on/off times of your receiver. To display the timer menu,
press the RED button while in the guide menu. <Figure 6.4.2>
⊺
Press to select a timer’s parameter.
⊻
Press / to change the parameter.
- Timer No : Select the timer that you want to modify.
(
1- 8
)
- State : Select the timer frequency. (off/once/daily/Mon~Fri/weekly)
- Date : Press to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press to display a Channel list pop-up; Select a channel
7) Add Channels
This submenu allows you to add channels.
⊹
Press on ‘Add Channels’. The following menu will be displayed. <Figure 6.3.8>
⊺
Press / to change the parameter.
- Frequency : Select TP Frequency
- Channel Name : Press to display Keypad pop-up; Edit a channel’s name
- Channel Type : Select among TV / RADIO
- You can add specific channel of the transponder by setting its PID data (Video,
Audio and PCR).
- Video Type : Select the video type (MPEG1/2, H.264)
- Audio Type : Select the video type (MPEG1/2, HE-AAC, Dolby Digital(AC3), MPEG4,
AAC, Dolby Digital+(DD+))
<Figure 6.3.8>
6.3 Channels