16
z Factory Default
-Restore to factory default setting
(Details please refer to page 18)
Basic Operation
Scanning for channels
1. Press [MENU] and then press [LEFT]/[RIGHT] and highlight [Installation].
2. Press [OK] /[▶] to enter [Installation] menu.
3. Press [UP]/[DOWN] to select “Auto Search” and press [OK], the unit will start
to scan all available channels.
4. OR
you can use the Manual Search option to search for specific channels.
Once you have entered the [Installation] menu, use [UP]/[DOWN] to select and
enter “DTV Manual Search”.
a) Press [▲][▼] to view the channel frequency
b) Press [OK] to confirm the channel frequency to search
c) Press RED button to begin scan
To Next Page
Loading...