8
4.0 SETTING UP YOUR DEVICE
Remote control pairing
You may turn on your devices after properly connecting all the hardware.
If all is properly connected and powered On, pairing screen will be showed on your TV screen.
When you do not see this screen, check if the correct HDMI input is selected on TV.
To be able to use Google Assistant on your remote control, you must rst pair your Bluetooth Remote to your Android TV box.
Follow the pairing instruction on the screen.
Press at the same time the BACK and HOME button for more than 5 seconds until the led on the remote control is blinking. When
it was successful there will appear a message on screen. If not please check the batteries of the remote control or try it again.
4.1 First Installation
Step 1: Language
Select your preferred language on the Welcome Page.
English
Afrikaans
Bahasa Melayu
Català
Čeština
Dansk
...
Welcome
To Next Page
Loading...
