Stryker Power-LOAD - Cot locked into the trolley in the load position; Scenario

Scenario
Cot begins to collapse and the
trolley lifting arms do not raise.
1. Press up (↑) on the Power-LOAD
control panel to raise the cot
until the lifting arms stop.
2. At the foot end of the cot, press the
retract (-) button to raise the cot
legs. Load the cot into the vehicle.
Cot locked into the trolley
in the load position
Transfer assembly
Trolley assembly
Power-LOAD control panel:
Up button
Battery
LED
Error
LED