pg 29
Spring Reverb
The standalone spring tank became a staple of surf and spaghetti-
western music that developed in the ‘60s� The Spring reverb allows for
complete customization from warm and mellow to splashy and dripping
with its Tone and Mix Controls, Dwell parameter, and selectable number
of springs�
CHAMBER
HALL
ROOM
PLATE
SPRING
IMPULSE
CHORALE
MAGNETO
NONLINEAR
BLOOM
SHIMMER
CLOUD
push (param)
hold (back)
hold 3s (global)
VALUE
push (dual 1 2)
hold (save)
TYPE
PARAM
DWELL
NUMBER
VOICE
OUTPUT LEVEL
The Parameters menu (Spring reverb type is selected)
SPRING
Parameter
Values Description
Dwell
DWELL
Clean
Combo
Tube
Overdrive
Adjusts the amount of drive in the spring tank
preamp circuit:
• Clean - The cleanest spring tones�
• Combo - Adds more gain, as is typical in
combo amps with onboard spring reverb�
• Tube - An increase in both the gain and the
amount of harmonic components entering
the spring tank, like turning up the Dwell
control in an outboard spring reverb unit�
• Overdrive - Expands the preamp gain for
maximum trashiness�
Number of
Springs
NUMBER
1 Spring
2 Springs
3
Springs
Allows selection of 1, 2, or 3 Springs in the spring
tank� Increasing the number of springs adds
complexity due to the interaction of the different
delay times of each individual spring�
Voice
VOICE
MX
Classic
Offers a choice between two different Spring
voicings:
• MX – The quintessential spring tank, dripping
with authenticity and splashy dynamic
response�
• Classic – A lively spring with plenty of bounce
and rattle�
To Next Page
