pg 6
Footswitches
CHAMBER
HALL
ROOM
PLATE
SPRING
IMPULSE
CHORALE
MAGNETO
NONLINEAR
BLOOM
SHIMMER
CLOUD
push (param)
hold (back)
hold 3s (global)
VALUE
BA INFINITE
DECAY PRE-DELAY
TONE
MOD PARAM 1 PARAM 2 MIX
BANK DOWN
push (dual 1 2)
hold (save)
TYPE
BANK UP
BIGGER BLUE
SLINKY
43A
1
2
B
IMPULSE
MARBLE
101A
DUAL IMPULSE
FOOTSWITCHES A & B
Press switch A or B to engage or bypass the current bank's preset�
The switch’s LED is lit bright green when its preset is engaged�
Press the A & B switches together select a lower bank� Press B &
INFINITE together to select a higher bank�
NOTE: Configure the Global Settings - FOOTSW MODE for Preset or
Dual mode� See page 51 for details�
INFINITE
Hold INFINITE for Infinite sustain or Freeze for the current reverb�
NOTE: Select between Infinite or Freeze sustain options via the INF
MODE parameter—see page 21�
Also, optionally change the INFINITE footswitch’s behavior between
Momentary and Latching via the Inf Latch parameter—see page 45�
To Next Page
Loading...
