pg 45
1+2 Parameters
Within the Parameter (PARAM) menu are several 1+2 Parameters,
which appear in the PARAM menu regardless of which reverb type is in
use� The 1+2 parameters are “shared” types and applied simultaneously
to both Reverb 1 and Reverb 2 for the current preset� When Reverb 2
is Off, the 1+2 parameters are applied to Reverb 1� Also, see "Utilizing
Single or Dual Reverbs" on page 8�
1+2 parameters appear at the end of the PARAM menu list (see page
19), and are indicated with a symbol to their left�
A
PARAM
INF LATCH
BOOST
PERSIST
EXP SETUP
H
H
H
H
The Parameter menu, showing 1+2 parameters
Settings made for 1+2 parameters are stored individually per preset� The
following list includes all 1+2 parameters and their descriptions�
1+2 Parameter
Values Description
Infinite Latch
INF LATCH
Momentary
Latching
Sets the behavior for the INFINITE footswitch
as either momentary or latching:
• Momentary - The Infinite or Freeze is
engaged only while the Infinite footswitch is
held down�
• Latching - The Infinite or Freeze is
engaged on push-release of the INFINITE
footswitch and disengaged with the next
push-release�
NOTE: Use any reverb type’s individual Inf
Mode parameter to select Infinite or Freeze
behavior� See page 21�
Boost
BOOST
Changes the output level for the preset, from
-3�0dB to +3�0dB� This can be useful for level
matching in your effects chain, or can be used
as an effect such as for boosting a solo with
reverb�
To Next Page
Loading...
