Strymon Big Sky MX - Page 46

pg 46
1+2 Parameter Values Description
Persist
H
PERSIST
On
Off
Allows reverb decay “trails” to continue to be
heard when the effect is bypassed:
• On - Allows reverb “trails” to persist�*
• Off - Disables the function so that any
audible reverb decay is immediately
silenced when the effect is bypassed�
*NOTE: Enabling Persist will automatically set
BigSky MX to Buffered Bypass—see "Bypass"
on page 49
�
TIP! Enable the Global Spillover option (page
48
) to persist trails between preset changes�
Expression
Pedal Setup
H
EXP SETUP
MIDI On/
Off
Heel
Toe
Allows assignment of one or multiple knobs
for expression pedal control per preset� Note
that knob assignments can be controlled via
an expression pedal connected to the EXP jack
and via MIDI control (MIDI CC 100)�
• M
IDI On/Off - Enables or disables control
of the assigned knobs via MIDI Expression
pedal using MIDI CC# 100 for the current
preset� (This setting does not affect control
via an EXP jack-connected expression
pedal�) When the double-arrow indicator
appears to the right of MIDI On/Off, turn
VALUE to On to enable or Off to disable
Expression MIDI control�
• Heel and Toe - Connect an expression
pedal (TRS, 25k Ohm) to the rear panel
EXP jack to assign the desired knob(s) for
control and access and configure the Heel
and Toe values to set the min� and max�
parameter range�
See "Expression Pedal Setup" on page 57
for detailed setup instructions