pg 47
1+2 Parameter
Values Description
Dual Reverb
Enable
DUAL
Off
Parallel
Series 1 2
Series 1 2
Split 1L|2R
Split 1R|2L
Configures the preset to utilize one reverb (Off),
or any two reverbs with the choice of routing�
• Off - Disables Reverb 2, so that the preset
utilizes only one reverb�
• Parallel - Routes the two reverbs in
parallel, keeping processing discrete for
each�
• Series 1 2 - Routes Reverb 1’s output into
Reverb 2�
• Series 1 2 - Routes Reverb 2’s output into
Reverb 1�
• Split 1L|2R - Routes Reverb 1 to the Left
Out and Reverb 2 to the Right Out�
• Split 1R|2L - Routes Reverb 1 to the Right
Out and Reverb 2 to the Left Out�
NOTE: All of these options are also available
from the TYPE encoder for easy access—
see page 8 details�
Copy Settings
From
COPY FROM
Presets
00A thru
149B
Allows the selection of another preset to copy
its Reverb 1's reverb type and settings instantly
to Reverb 2 of the current preset, saving the
time of manually configuring your preset�
Simply select any preset (00A to 149B) from
the list to copy the preset’s settings�
NOTE: Remember to save the preset after configuring its 1+2 Parameters to
retain all edited settings—see page 15�
To Next Page
Loading...
