pg 76
Hardware Control and Other
Parameter CC Values Notes
A Footswitch 80 0 = Press
127 = Release
Send CC using a momentary
type switch controller�
B Footswitch 81 0 = Press
127 = Release
Infinite
Footswitch
82 0 = Press
127 = Release
Value Encoder 83 0 = Scroll
counter-clockwise
1 = Scroll clockwise
Infinite Off/On 97 0 = Off
1-127 = On
Expression
Pedal
100 0-127
CC 100 will control the
per-preset knob assignments
you create using the PARAM
menu's - EXP Setup screen�
The EXP Setup - MIDI EXP
option must also be set to ON
to allow MIDI control—see
page 57�
Bypass 102 0 = Bypassed
1-127 = Engaged
MIDI Patch
Bank
0 0-2:
• 0 = Bank 0 (Preset
locations 00A - 63B)
• 1 = Bank 1 (Preset
locations 064A - 127B)
• 2 = Bank 2 (Preset
locations 128A - 149B
Send CC 0 with the value
of 0, 1, or 2 to select the
respective Bank 0, 1, or 2,
followed by MIDI PC to select
a Preset location within the
Bank—see page 68�
NOTE: Many MIDI controllers send out values 0 and 127 for on/off switches�
NOTE: Some MIDI applications and controllers start their MIDI enumeration
with 1 instead of 0� In these setups, increment the numbers above by one�
To Next Page
Loading...
