Stuart Turner Mainboost MJ3 VM - Table of Contents

- 2 –
PRODUCT DESCRIPTION
Mainsboost Charger MJ3 consists of three key assemblies, the Mainsboost vessel,
Charger MJ3 pump and upstream line-in kit.
APPLICATION
Mainsboost Charger MJ3 is designed to offer stored clean, potable cold water under
pressure for all domestic or small commercial applications where mains water is
insufficient to offer consistent and reliable water services.
Installation parameters must not exceed the values given in the technical
specifications.
STORAGE
If this product is not to be installed immediately on receipt, ensure that it is stored in a
dry, frost and vibration free location in its original packaging.
CONTENTS Page
Checklist ...........................................................5
Introduction .........................................................9
Important Facts – read before commencing installation ......................10
Location ............................................................11
Terminology .........................................................12
Configuration ........................................................13
Installation ..........................................................15
Electrical ...........................................................23
Commissioning ......................................................25
Technical Specification ................................................28
Trouble Shooting .....................................................30
Warranty ...........................................................31