IT IS HEREBY CERTIFIED THAT THE STUART ELECTRIC MOTOR DRIVEN PUMP AS SERIAL
NUMBER BELOW, COMPLIES WITH THE ESSENTIAL REQUIREMENTS OF THE ABOVE
STATUTORY REGULATIONS & E.U. DIRECTIVES.
Signed ..........................................................................
Stuart Turner Ltd, Henley-on-Thame
s, Oxfordshire RG9 2AD EN GLAND
Tel: +44 (0) 1491 572655 Fax: +44 (0) 1491 573704
info@stuart-turner.co.uk | www.stuart-turner.co.uk
Machinery Directive - 2006/42/EC
EN ISO 12100:2010, EN 809:1998+A1:2009/
AC:2010
Low Voltage Directive - 2014/35/EC
EN 60335-1:2012/A2:2019, EN
60335-2-41:2003/A2:2010
EMC Directive - 2014/30/EU
EN 55014-1:2017/A11:2020, EN
55014-2:2015, EN 61000-3-2:2014, EN
61000-3-3:2013
EMF Directive - 1999/519/EC
EN 62233:2008
RoHS Directive - 2011/65/EU
EN IEC 63000:2018
WEEE Directive - 2012/19/EU
Supply of Machinery Regulations -
2008
EN ISO 12100:2010, EN 809:1998+A1:2009/
AC:2010
Electrical Equipment Regulations -
2016
EN 60335-1:2012/A2:2019, EN
60335-2-41:2003/A2:2010
EMC Regulations - 2016
EN 55014-1:2017/A11:2020, EN
55014-2:2015, EN 61000-3-2:2014, EN
61000-3-3:2013
EMF Regulations - 2016
EN 62233:2008
RoHS Regulations - 2012
EN IEC 63000:2018
DECLARATION OF CONFORMITY
EU AUTHORISED REPRESENTATIVE
ARC (AUTHORISED REP COMPLIANCE)
GND FLOOR, 71 LOWER BAGGOT
STREET, DUBLIN,
D02 P593, IRELAND.
Stuart Turner are an approved company to BS EN ISO 9001:2015
STUART TURNER LIMITED
HENLEY-ON-THAMES, OXFORDSHIRE
RG9 2AD, ENGLAND.
RESPONSIBLE PERSON AND MANUFACTURER
Issue: 2521-01-01
Part No: 21070
To Previous Page
Loading...
