- 4 –
Cont ...
z The motor is provided with a factory fitted supply
cord and plug. This must be connected to the mains
supply via a 13 Amp double pole switched, socket
outlet in compliance with BS 1363–2.
z A plug with bared flexible cords is hazardous if
engaged in a live socket outlet.
z Do not run the pump dry.
z In the unlikely event of mechanical seal failure
pollution of the liquid could occur due to the
leakage of lubricants.
z If the supply cord is damaged, it must be replaced
by Stuart Turner Ltd or an official Service Agent to
avoid hazard.
Please read installation details carefully as they are intended to ensure this product
provides long, trouble free service. Failure to install the unit in accordance with the
installation instructions will lead to invalidation of the warranty.
To Next Page
Loading...
