9. To locate a particular section within a track, press and hold the / button until the
section is found.
10. To stop playing, press the STOP
button
11. Slide the FUNCTION switch to POWER OFF position to turn off the unit
+10 button control
Press the +10 button once to advance the music search by increment of 10 tracks.
REPEAT MODE
Repeat 1
To repeat the current track, press the REPEAT BUTTON once, the REPEAT INDICATOR will
flash in LED display. The track will continue to play until the repeat function is turned off.
Repeat All
To repeat all the tracks, press the REPEAT BUTTON twice, the REPEAT INDICATOR will be
solid on. All the tracks on the disc will be played repeatedly.
To Cancel Repeat Function: Press the REPEAT BUTTON until REPEAT indicator goes off
from LED display.
PROGRAM OPERATION
This function allows the tracks to be played in a programmed sequence.
NOTE: Programs can be set in STOP mode.
1. In CD stop mode, press REPEAT/PROGRAM button, the PROG indicator will light and
Program Number “P01” will show on LED display.
2. Press the SKIP
or button to select the desired track. The track number “1” (001 for
MP3 CD) will blink on the LED display to prompt for input.
3. Press the PROGRAM button to confirm the selection. Program Number advances to “P02”.
4. Repeat step 2 to 3 to program up to maximum of 20 tracks.
5. When maximum of 20 tracks have been programmed, the LED display will show “FUL” to
indicate program is full.
6. When you have completed programming, press the PLAY/PAUSE
button to start
playing. Both PROG and Play/Pause indicators are lighting steadily.
7. To cancel programmed play, press the STOP
button twice. PROG indicator goes off.
USING TREBLE / BASS / BALANCE CONTROL KNOBS
• TREBLE: Adjust TREBLE level of music playback.
• BASS : Adjust BASS level of music playback.
• BALANCE : Adjust BALANCE for balance left and right speaker.
USB OPERATION
The unit is designed to play MP3 files stored in the USB flash-drive. If the files on the USB
device do not conform to the standard, they may not be played.
1. Slide the FUNCTION switch to CD/USB/AUX position. Press and hold the CD/USB/PAIR/
button until USB mode indication “USB” shows on LED display and USB indicator flashing.
To Next Page
Loading...
Need help?
General
