Poor cassette sound
quality
Recording does not
work
Dust and dirt on the heads,
capstan or pinch roller
Cassette tab(s) maybe broken out
Clean the heads etc…
Apply a piece of adhesive tape
over the missing tab space
CD pla
e
will not
play
Unit not in CD function mode.
CD is installed incorrectly.
If the CD is self-compiled, the
media used may not be compatible
with the player.
Slide Function switch to CD.
Insert CD with label side up.
Use better quality blank media
and retest.
CD skips while
playing
Disc is dirty o
sc
atched.
Wipe CD with clean cloth or
use another disc.
Inte
mittent sound
from CD Player
Dirty o
defective disc.
Dirty pick up lens.
Player is subject to excessive
shock or vibration
Clean or
eplace the defective
disc.
Use a CD-lens cleaning disc
to clean the lens.
Relocate the player away
from shock or vibration
BT No Sound Unit is not linked with
the Bluetooth enabled
device.
Unit placement out of
range
Volume set too low
Go through “BLUETOOTH
OPERATION” process to link
the speaker.
Relocate the unit within
Bluetooth operating range
(30 feet)
Increase Volume level.
SPECIFICATION
Radio Frequency Range : AM: 530 – 1710 KHz
: FM: 88 – 108 MHz
Audio Output Power : 2 X 5W (RMS)
Tweeter : 2 x 1.5 inch / 6 ohms
Woofer : 2 x 4 inch / 6 ohms
Bluetooth : V5.0 + EDR
USB : Support USB device up to 32GB
Power Source :
AC Adapter : Input AC 120V~ 60Hz
: Output DC 12V
,1.5A
Built-in Rechargeable Lithium Battery : DC 7.4V , 2200mAh
Due to continuing improvement, the features and the design are subject to change without
notice.
To Previous Page
Loading...
