Studebaker SB2140 - Cassette Operation and Recording; Cassette Playback and Auto-Stop; Recording from Microphone, Radio, CD

Recording from the built-in Radio
1. Slide the FUNCTION switch to "Radio" position. The POWER indicator will light.
2. Select the BAND switch to the desired band position.
3. Adjust the
ANTENNA appropriately to obtain best reception
4. Insert the cassette into the Cassette Compartment.
5. Press the PAUSE button.
6. Press the RECORD button.
7. Release the PAUSE button to begin recording.
8. Adjust the VOLOUME, if necessary.
9. To stop recording, press STOP/EJECT button. When the tape operate to the
end recording will be stop automatically.
Recording from Discs
1. Slide the FUNCTION switch to "CD" position. The POWER indicator will light.
2. Grip the “OPEN” mark on the CD Door and pull gently to open it.
3. Carefully load an audio CD with its label side OUT ward in the CD compartment then gently
close the CD door
4. The player will start reading TOC of the disc, total number of tracks on the CD will appear on
the LED DISPLAY after a few seconds.
5. Insert the cassette into the Cassette Compartment.
6. Press the PAUSE button.
7. Press the RECORD button.
8. Press the PLAY/PAUSE
button to start to play.
9. Release the PAUSE button to begin recording.
10. Adjust the VOLUME, if necessary.
11. To stop recording, press STOP/EJECT button. When the tape operate to the end recording
will be stop automatically.
Recording from the USB
1. Slide the FUNCTION switch to "USB" position. The POWER indicator will light.
2. Insert your USB flash-drive into the USB port, unit starts to read the USB flash-drive.
3. After reading the USB flash-drive, the unit will display the total number of files on the flash-
drive
4. Insert the cassette into the Cassette Compartment.
5. Press the PAUSE button.
6. Press the RECORD button.
7. Press the PLAY/PAUSE
button to start to play.
8. Release the PAUSE button to begin recording.
9. Adjust the VOLUME, if necessary.
10. To stop recording, press STOP/EJECT button. When the tape operate to the end recording
will be stop automatically.
Recording from the Aux In
1. Slide the FUNCTION switch to "Aux" position. The POWER indicator will light.
2. Plug one end of an audio cable (not included) into the AUX IN JACK and the other end of the
cable to the headphone jack of your digital audio player.
3. Turn on and start playing the external device you plugged into the AUX IN JACK.
4. Insert the cassette into the Cassette Compartment.
5. Press the PAUSE button.