EasyManua.ls Logo

Studer AJ 350-24 - Warranty Limit; Limits of Manufacturer Liability; Jt8 Remote Control for Aj 1000-12 to 2400-24

Studer AJ 350-24
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STUDER Innotec AJ
AJ V2.7 11/50
WARRANTY LIMIT
The warranty period is 5 years.
It does not cover damages arising from a use
not conforming to the user manual, not
described in it or resulting from any other
inappropriate use like:
x Battery reverse polarity
x Inadequate input voltage
(overvoltage)
x Back-feeding at the inverter output by
public grid, generator or any other
source.
x Mechanical shock or deformation
especially by transport due to an
inadequate package.
x Contact with liquid or oxidation by
condensation.
Use in inappropriate environment (dust,
corrosive vapour, humidity, high temperature
...).
LIMITS OF MANUFACTURER LIABILITY
STUDER INNOTEC cannot control the
installation, use and maintenance of the
inverter. Thus, we are not responsible for
damages, costs or losses resulting from an
installation which is not in accordance with
the regulations or from inappropriate use or
maintenance.
The customer is always responsible for the use
of the inverters STUDER INNOTEC.
This device has not been designed and is not
warranted for use in life support equipment or
any other critical device with potential risks of
important harm to people or to the
environment. We do not accept any
responsibility for any violation of patent rights
or other third person rights resulting from the
use of the inverter.
STUDER INNOTEC keeps the right to modify its
products without previous notice.
JT8 REMOTE CONTROL FOR AJ 1000-12 TO 2400-24
Functions on remote control are the same as control and indicator
on the inverter (see chapter Use p. 6).
Remote control must be connected to the inverter with the original
STUDER 10 m cable or any RJ11/6p 1:1 cable up to 50 m.

Table of Contents