Studer BSP 1200 - Index

Studer Innotec SA
BSP
User Manual V1.0.3 25
Index
Symbols
{6000} Basic settings, 20
{6001} Nominal capacity, 20
{6002} Nominal discharge time (C-rating), 20
{6003} Reset of battery history, 20
{6004} Restore default settings, 20
{6005} Restore factory settings, 20
{6016} Advanced settings, 21
{6017} Nominal shunt current, 20
{6018} Nominal shunt voltage, 20
{6019} Self discharge rate, 21
{6020} Nominal temperature, 21
{6021} Temperature coefficient, 21
{6022} Charge efficiency factor, 21
{6023} Peukert's exponent, 21
{6024} End of charge voltage level, 21
{6025} End of charge current level, 21
{6026} Minimum time before end of charge, 21
{6031} Reset of user counters, 21
{6042} Activate the end of charge synchronization, 21