Studer D21m - Page 51

D21m System
D21m Modules 6-15Date printed: 25.09.07
MADI
MAIN
(RJ45)
ACTIVE IF
FS_SYS
MADI
AUX
(RJ45)
S1.1
Reserved pairs
for FS Sync
transmission
S1.2
S1.5
S1.6
S1.3
S1.4
S1.7
S1.8
Backplane Connector
WCLK
OUT
1
0
S4.7
S4.8
*S2 (On versions 1.949.430, 1.949.431 only)
Rotary switch for baud rate selection of the RS422 user interface:
Position Setting
0 115’200 bps (factory default)
1 57’600 bps
2 38’400 bps (9-pin)
3 31’250 bps (MIDI)
4 19’200 bps
5 9’600 bps
6...9 Reserved for future use
S3 DIP switch for D21m channel count setting:
1 2 3 4 5 6 7 8 Number of Channels
ON ON ON ON - - - -
0 inputs
ON ON ON OFF - - - -
8 inputs
ON ON OFF ON - - - -
16 inputs
ON ON OFF OFF - - - -
24 inputs
ON OFF ON ON - - - -
32 inputs
ON OFF ON OFF - - - -
40 inputs
ON OFF OFF ON - - - -
48 inputs
ON OFF OFF OFF - - - -
56 inputs
OFF ON ON ON - - - -
64 inputs (factory default)
OFF
:
OFF
ON
:
OFF
ON
:
OFF
OFF
:
OFF
-
-
-
-
-
-
-
-
-
-
-
-
NOT ALLOWED
- - - - ON ON ON ON
0 outputs
- - - - ON ON ON OFF
8 outputs
- - - - ON ON OFF ON
16 outputs
- - - - ON ON OFF OFF
24 outputs
- - - - ON OFF ON ON
32 outputs
- - - - ON OFF ON OFF
40 outputs
- - - - ON OFF OFF ON
48 outputs
- - - - ON OFF OFF OFF
56 outputs
- - - - OFF ON ON ON
64 outputs (factory default)
-
-
-
-
-
-
-
-
-
-
-
-
OFF
:
OFF
ON
:
OFF
ON
:
OFF
OFF
:
OFF
NOT ALLOWED