Features / General Description of Product
Rugged 19” rack mountable design of chassis.
Low THD and high damping factor for excellent sound quality.
Slide Switches For 1) Mode selection ( Mono / Stereo / Bridge)
2) Sensitivity ( 0.775 V / 1V / 1.4 V)
3) Low - cut (30Hz) (ON / OFF )
4) Ground Lift ( GND / LIFT)
5) Limiter
6) HF Limiter
This owners Manual covers 4 models, DPA 2000, DPA 3200, DPA 4500 & DPA 5000 power amplifiers. through
this manual carefully before beginning use, so that you will be able to take full advantage of amplifier’s superlative features
and enjoy trouble free operation for years to come. After reading through the manual, please store it in a safe place.
Please read
Thank you for your purchase of the STUDIOMASTER DPA Series power amplifiers. These amplifiers fully incorporate
STUDIOMASTER’s renowned technology and offers high reliability, rock solid stability and superb acoustic
characteristics.
Balanced / Unbalanced input signal through parallel XLR in both channels.
Twin tunnel cooling with front to back airflow.
Limiter circuit protects the amplifier and speaker from being over driven because of high input level signal.
Designed with a sophisticated VHF limiter that reduces the risk of HF stress, and protects your speakers, particularly
HF units.
Output termination on 4 way speakon Connectors and Binding posts for each channels.
Indicator LEDs for Signal, Mode Selection.
Clip, Protect, Power ON,
Extensive protection circuitry for Overheat, Overload, DC, Output short circuit.
High current torroidal transformer which provides excellent regulation and minimized hum & noise.
6
*Please retain original packing should you have to return the unit for the repairs.
To Next Page
Loading...
