12
AIR BOOSTER 2
EN/10.2018/IT30I © STULZ SpA – all rights reserved
LIFTING AND TRANSPORT
DANGER
Capacity of lifting device must be appropriate for the weight of the unit.
Load must be balanced to avoid tilting.
Avoid offhanded or rough manoeuvres.
Don’t lay other objects upon the unit.
When removing the grill take care of avoid pinching under its weight
ATTENTION
Risk of unit deformation
Don’t move the unit on rolls, or with forklift after removing the pallet, to avoid any structural
deformation.
3.2. Storage
INFORMATION
Standard packing doesn't protect the unit from rain and bad weather
Standard packing is not suitable for seafreight
Standard packing is not suitable for airfreight
If the unit is stored before the installation, comply with the following instructions:
• Don't expose to direct solar radiations;
• Store the unit with its original packaging.
Please see the ambiental condition for storage in paragraph "Application limits".
Removal of packing
• Remove packing without damaging the unit: remove the box and the pallet under the unit;
• Recover any document or component inside the packing;
• Keep original packing (pallet and protections) for future shipments.
ATTENTION
Use original packing to ship the unit to any other destination
If packing disposal is necessary, we remind to dispose different materials suitably