Stulz ASU series - 1.3 Operator Duties and Regulations

7 © STULZ GmbH – all rights reserved EN/06.2017/G18A-D
cyberair 3PrO cW Original inSTrUcTiOnS
1.3 Duties of the operator
The following requirements relate to the operation of refrigerating plants within the European Community.
• Theusedcomponentsmustcorrespondtothepressureequipmentguide-lineEC/97/23andEN378part
1-4.
• Independentofthedesign,theequipmentandinspectionbeforethedelivery,alsotheoperatorofsuch
plantshasdutiesaccordingtoEN378andnationalregulations.
This concerns the installation, the operation and the repeated inspection:
• Installation:accordingtoEN378
• Operation: Determination of emergency measures (accidents, malfunctions)
Creation of an abbreviated instruction and notification (template page)
a. A unit protocol must be kept.
b. To be stored in the proximity of the unit
c. Access for competent staff in case of repairs and repeated inspection must be ensured.
• Repeatedinspection:accordingtoEN378
The operator is responsible for the execution.
The operator must ensure that all maintenance, inspection and assembly work is carried out by authorised
andqualiedspecialiststaffwhohavemadeanin-depthstudyoftheoperatinginstructions.
Independent conversion and manufacture of replacement parts
ThesystemmayonlybeconvertedormodiedafterconsultationwithSTULZ.Originalreplacementpartsand
replacementparts/accessoriesauthorisedbySTULZareanaidtosafety.