Stulz ASU series - Storage

9 © STULZ GmbH – all rights reserved EN/06.2017/G18A-D
cyberair 3PrO cW Original inSTrUcTiOnS
2.3 Storage
Ifyouputtheunitintointermediatestoragebeforetheinstallation,thefollowingmeasureshavetobecarried
out to protect the unit from damage and corrosion:
• thestoragepointmustnotbeexposedtodirectsunlight.Observethestorageconditionsinthechapter
“Application limits“.
• storetheunitpackagedtoavoidtheriskofcorrosion.
• makesurethatthewaterconnectionsareprovidedwithprotectivehoods.