Stulz CompTrol 1002 - 4 Menu

6
13
14
15
16
17
18
21
22
23
24
25
9
8
7
10
11
12
20
19
4
5
3
2
1
E/0310/50/11
4. Menu
The menu items 8-11 depend on the position of the Dip-switch 2. The menu item 25 only
exists, if the Dip-switch 2 is in position "ON".
RT : Room temperature
RH : Room humidity
Actual opening degree CW-valve
(only at CW-version)
Sequencing for 2 units
Integral factor
Unit start delay
Humidity sensor adjust.
Temperatur sensor
adjustment
CPU-address
Dehumidification hysteresis
Dehumidification start value
Humidification hysteresis
Humidification start value
Reheat 2 start value
Reheat 1 and 2 hysteresis
Limit value RH too low
Limit value RH too high
Limit value RT too low
Limit value RT too high
Humidity setpoint
Temperature setpoint
Actual values: temperature / humidity
Valve modulating time
/comp. restart delay
CW-valve proportional range/
compressors hysteresis
CW-valve start value/
1
st
compressor start value
CW-valve opening degree for dehumi
-
dification / 2
nd
compressor start value
Reheat 1 start value