Sub-Zero 685 Planning Information

Planning Information
Built-In Model 685
Dimensions in parentheses are in
millimeters unless otherwise specified.
3
MODEL OPTIONS
Framed Design 685/F
Partial Framed Design 685/F
(accessory kit required)
Overlay Design 685/O
Classic Stainless Steel 685/S
ACCESSORIES
FRAMP
AR – P
artial framed kit
includes molding and a stainless
steel insert panel for above and
below the glasswell on a framed
unit
FRAMRET – Framed retrofit kit
includes moldings and stainless
steel insert panels to accommo-
date existing Model 680 framed
door panels
Louvered, panel or stainless steel
grilles in 1" (25) increments from
10" (254) to 15" (381) high
Front and grille panels for framed
design in white
, almond and
classic stainless steel
Side panels in white
, almond and
classic stainless steel
Stainless steel and polished
chrome handles for overlay design
Gallon door shelf
Dozen egg container with lid
90˚ and 105˚ door stop kits
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website
, subzer
o.com.
SPECIFICATIONS
M
odel 685 Side-by-Side Refrigerator / Freezer
w
ith Ice and Water Dispenser
Overall Width 42" (1067)
Overall Height 84" (2134)
Overall Depth 24" (610)
Refrigerator Capacity 15.6 cu ft (442 L)
F
reezer Capacity 8.2 cu ft (232 L)
Minimum Height (levelers in) 83" (2108)
Door Swing Clearance 25
9
/1
6
" (649)
Electrical Requirements
115 V AC, 60 Hz, 15 amp circuit
Plumbing Requirements
1
/4" copper line
Water Supply 20–100 psi
Annual Energy Usage 694 kWh / $ 63
(based on 9.06 cents per kilowatt hour)
Shipping Weight Framed – 569 lbs (258 kg)
Overlay – 569 lbs (258 kg)
Stainless Steel – 608 lbs (276 kg)
Special Note Overlay design is now available
for this ice and water dispensing unit
Specifications are subject to change without notice.

Sub-Zero 685 Specifications

General

Brand	Sub-Zero
Model	685
Category	Refrigerator
Language	English