Sub-Zero BI-36UFD - Page 37

STANDARD HANDLES
Refer to the chart below for standard handle lengths
and the stud spacing of tubular and pro handles used on
built-in models.
Built-In Refrigeration 37
subzero.com/specs
Accessories
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
• Grilles for an 83" (2108) or 88" (2235) finished height.
• Framed front panels in stainless steel and white
enamel.
• Flush inset and dual flush inset panels in stainless steel
with tubular or pro handles.
• Custom front panel mounting kit.
• Side panel in stainless steel and white enamel.
• Stainless steel tubular and pro handles to match the
style of Wolf ovens and ranges.
• Full-length standard and extended framed handles.
• Stainless steel kickplate.
• Dual installation kit with or without dual wide grille.
• Retrofit kits for use with 600 series panels.
• Partial framed kit for dispenser models.
• Dozen egg container.
• 90° door stop.
• Replacement air purification cartridge and water filter.
Standard Handles Length Stud Spacing
FULL-HEIGHT DOOR
Tubular Handle 63
7
/8" (1622) 43
7
/8" (1114)
Pro Handle 45
3
/16" (1147) 43
7
/8" (1114)
BI-30U(G), BI-36U(G) AND BI-36UFD DOOR(S)
Tubular Handle 44
1
/4" (1124) 36
1
/4" (921)
Pro Handle 37
1
/2" (952) 36
1
/4" (921)
BI-30U(G) DRAWER
Tubular Handle 24
5
/16" (633) 16
5
/16" (414)
Pro Handle 17
9
/16" (447) 16
5
/16" (414)
BI-36U(G) AND BI-36UFD DRAWER
Tubular Handle 30
5
/16" (770) 22
5
/16" (567)
Pro Handle 23
5
/8" (600) 22
5
/16" (567)