27
Technical Data
Light Relay : 5A/230vac
Room & Evap Temperature :
Accuracy : +/-1 Amp.
Condenser Relay : 10A/230vac
HP, LP, Auxiliary / CTH(Compressor Thermal) , Oil Pressure Switch(OPS),
Digital Inputs:
0 0
Range : -50.0 C to 50.0 C
Alarm Relay : 5A/230vac
0 0
Probe Tolerance at 25 C : +/-0.3 C.
0
Accuracy : +/-1 C.
Compressor current (R,Y,B)
Door, SPPR, R-Ph, Y-Ph, B- Ph.
1) Temperature sensor:
Baud Rate : 9600
Sensor Type : NTC Thermistor.
Sensors :
Buzzer : Internal
Device ID : 1 (By Default)
Analog I/p:
0
Resolution : 0.1 C.
LSV Relay : 10A/230vac
Resolution : 0.1Amp.
RS485 Connectivity : Modbus RTU Protocol
Mounting : Wall mounting.
Controller : CRC-2052
0 0
Operating Temp : 5 C to 50 C(non-condensing).
0 0
Storage temp : -20 C to 70 C(non-condensing).
Output :
Defrost Relay : 5A/230vac
Sheet Metal : (H)450 x (W) 400 x (D)200 mm
Compressor Relay : 5A/230vac
Evap. Relay : 5A/230vac
requirement)
4 sq. mm wire.
Display : 4 Digit, 1” Dot matrix Display and 13 LEDs for
Housing : Plastic / Sheet Metal (as per customer
Connection : Spring clamp terminal block.
3Phase Supply with Neutral
indication.
Data Storage : Non-Volatile EEPROM Memory.
Power Input (Options) : 415Vac +/-10%, 50-60Hz.
Dimensions : Plastic : (H)400 x (W) 300 x (D)135 mm
To Next Page
Loading...
Need help?
General
