IMPREZA(NA) A1850BE-A (ENGLISH)
2
Keys and doors
2-11
– CONTINUED –
2. Open the driver’s door and sit in the driver’s seat.
3. Close the driver’s door.
1) ON 2) LOCK
4. Place the ignition key into the ignition switch and
cycle the switch from LOCK to ON ten times within
15 seconds. Be sure to stop at the LOCK position.
The horn will sound once to indicate that you are in
the transmitter programming mode.
NOTE
You must finish the next step (opening the driv-
er’s door) within 45 seconds of starting this pro-
cedures.
To Next Page
Loading...
