IMPREZA(NA) A1850BE-A (ENGLISH)
Interior equipment
6-16
J To install the cover housing
1. Pull either sleeve on the end of the cover housing
to shorten the cover’s length.
2. Insert the projections located on the both ends of
the sleeve into the recesses of the retainers.
Cargo tie-down hooks (if equipped)
The cargo area is equipped with four tie-down
hooks so that cargo can be secured with a cargo
net or ropes.
When using the tie-down hooks, turn them down out
of the storing recesses. When not in use, put the
hooks up into the storing recesses.
To Next Page
Loading...
