IMPREZA(NA) A1850BE-A (ENGLISH)
Maintenance and service
11-74
1. Remove the lens by prying the edge of the lens
with a regular screwdriver.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the lens.
J Trunk light
1. Remove the cover by squeezing its sides and
pulling it.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the cover.
J High mount stop light
B Sedan
1. Remove the high mount stop light cover by pry-
ing the edge with a screwdriver.
2. Pull the bulb out of the socket. Install a new bulb.
3. Reinstall the cover.
To Next Page
Loading...
Need help?
General
