Subaru 2003 Impreza - 3-4; Headlight Flasher; High;Low Beam Change (Dimmer)

IMPREZA(NA) A1850BE-A (ENGLISH)
3
Instruments and controls
3-17
– CONTINUED –
J High/low beam change (dimmer)
To change from low beam to high beam, push the
turn signal lever forward. When the headlights are
on high beam, the high beam indicator light “a”
on the instrument panel is also on.
To switch back to low beam, pull the lever back to
the detent position.
J Headlight flasher
To flash the headlights, pull the lever toward you and
then release it. The high beam will stay on for as
long as you hold the lever. The headlight flasher
works even though the lighting switch is in the “OFF”
position.
When the headlights are on high beam, the high
beam indicator light “a” on the instrument panel
also comes on.