IMPREZA(NA) A1850BE-A (ENGLISH)
Instruments and controls
3-30
lanes. Use the inside mirror (or glance back-
wards) to determine the actual size and dis-
tance of objects that you view in convex mir-
ror.
B Remote control mirror switch
1) Selection switch
2) Direction control switch
The remote control mirrors operate only when the
ignition switch is in the “ON” or “ACC” position.
1. Press either end of the selection switch, “L” for
the left, “R” for the right.
2. Move the direction control switch in the direction
you want to move the mirror.
3. Return the selection switch to the neutral position
to prevent unintentional operation.
The mirrors can also be adjusted manually.
B Outside mirror defogger (if equipped)
1) OFF
2) ON
3) Push
The outside mirror defogger shares the switch with
rear window defogger.
The outside mirror defogger operates only when the
ignition switch is in the “ON” position.
To turn on the outside mirror defogger, push the
switch. To turn it off, push the switch again. The indi-
To Next Page
Loading...
