北米Model "A1470BE-A" EDITED: 2021/ 8/ 2
driver.
4. While depressing the brake pedal,
insert a screwdriver into the hole, move it
right and left while pushing the shift lock
release button using a screwdriver, and
then move the select lever.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. Con-
tact a SUBARU dealer for an inspection as
soon as possible.
& Driving tips
S07BG05
CAUTION
If the accelerator and brake pedals
are depressed at the same time,
driving torque may be restrained.
This is not a malfunction.
. Always apply the foot or parking brake
when the vehicle is stopped in the “D”, “B”
or “R” position.
. Always apply the parking brake when
parking your vehicle. Do not hold the
vehicle with only the mechanical friction
of the transmission.
. Do not keep the vehicle in a stationary
position on an uphill grade by using the “D”
or “B” position. Use the brake instead.
. The engine may, on rare occasions,
knock when the vehicle rapidly acceler-
ates or rapidly pulls away from a standstill.
This phenomenon does not indicate a
malfunction.
7-6. SI-DRIVE
S07BC
SI-DRIVE (SUBARU Intelligent Drive)
works to maximize hybrid system perfor-
mance, control and efficiency.
This system consists of the following
modes:
. Intelligent (I) mode
. Sport (S) mode
By operating the SI-DRIVE switches, the
character of the power unit changes.
& Intelligent (I) mode
S07BC02
! For smooth, efficient performance
driving
S07BC0201
The linear acceleration characteristic of
this versatile mode is ideal for normal
SI-DRIVE
316
To Next Page
Loading...
Need help?
General
